买交换机就在交换机商城JHJ.cn
China Network Operation Administration Maintenance

交换机商城

资本思维,助力企业借力资本,个人财富zengzhi
C-NIM-2T= 2-port 100Mbps/1Gbps dual-mode RJ45/SFP, NIM with WAN MACSec
思科路由器三层以太网网络模块
专题: https://www.jhj.cn/cisco-c8300
品牌: 思科(Cisco)
类型: 思科C8300系列路由器
采购下单: 010-86462600
申请折扣: 18611115727
零基础开户: 联系客服获取
分期付款: 支持

产品概览

Cisco ® Catalyst ® 8000 千兆以太网 WAN 模块为 Catalyst 8300 和8200 系列边缘平台。



这些模块取代了 Cisco 4000 系列集成多业务路由器支持的网络接口模块 (NIM) 和单宽增强服务模块 (SM-X) 以太网 WAN 模块。这些模块提供最大的灵活性,可加速以太网 WAN 访问、思科 SD-WAN 以及其他与 LAN、架顶式数据中心交换机和服务器的高速连接选项等应用。从第一天起,所有这些模块都提供对 SD-WAN 和 vManage 的支持。

这些模块上的端口用作路由的第 3 层端口。路由器的嵌入式 WAN 端口支持的所有功能也可用于这些 WAN 模块。

不支持模块上的本地端口之间或模块上的端口与路由器系统内的其他端口之间的第 2 层交换。这些模块上的端口终止来自外部连接交换机的第 2 层中继。因此,第 2 层中继和 VLAN 信息不会传递到系统中的其他端口。主机路由器路由进入这些模块的所有流量。

C-NIM-1M 模块支持以太网供电(PoE IEEE 802.3 af/at/bt)。

该数据表还涵盖了用于 Catalyst 8300 系列的 SM-NIM 载体适配器。此载卡使语音、WAN 和 LAN 模块的所有组合都可以热插拔并在服务模块 (SM) 插槽中运行。每个载卡最多支持 2 个 NIM,没有任何性能或功能限制。

思科提供三种以太网 WAN 模块:

●      Cisco 1-port 10-Gbps/1-Gbps WAN with 256-bit WAN MACsec (C-NIM-1X)图 1

●      Cisco 2 端口 100-Mbps/1-Gbps WAN NIM 和 256 位 WAN MACsec (C-NIM-2T)图 2

●      Cisco 1-port 2.5-Gbps/1-Gbps WAN NIM with Cisco UPOE® ( C-NIM-1M)图 3

Cisco 提供一张 SM-NIM 运营商适配器卡:

● 

 Cisco single-wide service module for 2x NIMs (C-SM-NIM-ADPT) Figure 4

Cisco 1-port 10-Gbps/1-Gbps WAN with 256-bit WAN MACsec (C-NIM-1X)

Figure 1.            

Cisco 1-port 10-Gbps/1-Gbps WAN with 256-bit WAN MACsec (C-NIM-1X)

The C-NIM-1X is a next-generation 10G Layer 3 WAN module. This module provides high-speed WAN connectivity through a single SFP+ port supporting 1-Gbps and 10-Gbps WAN connections. The 10-Gbps WAN connection is a non-oversubscribed connection, since it’s connecting to the backplane using a 10-Gbps link. Full 256-bit WAN MACsec is supported.

The C-NIM-1X does not support SFP transceivers for RJ-45 copper media, nor does it support 100BASE/10BASE SFP modules. The module is supported on all Catalyst 8300 Series platforms. It is not supported on the Catalyst 8200 Series platforms.

Cisco 2-port 100-Mbps/1-Gbps WAN NIM with 256-bit WAN MACsec (C-NIM-2T)

Figure 2.            

Cisco 2-port 100-Mbps/1-Gbps WAN NIM with 256-bit WAN MACsec (C-NIM-2T)

The C-NIM-2T is a dual combo port module with two RJ-45 copper line ports and two SFP fiber ports. The ports on this NIM are configured in two port groups with one RJ45 port and one SFP port in each group. One port from each group can be configured for simultaneous use, providing flexibility in the selection of media for WAN connectivity. The RJ-45 ports support 100BASE-TX and 1000BASE-T copper connections. The SFP ports support 100BASE-FX and 1000BASE-X fiber connections. The module supports 256-bit WAN MACsec. The C-NIM-2T is supported on the Catalyst 8200 Series, 8200L, and all 8300 Series platforms.


Cisco 1-port 2.5-Gbps/1-Gbps WAN NIM with UPOE (C-NIM-1M)

Figure 3.            

Cisco 1-port 2.5-Gbps/1-Gbps WAN NIM with UPOE (C-NIM-1M)

The C-NIM-1M is a single-port 2.5-Gbps BASE-T port module with Cisco UPOE+ (90W).

Its single copper port supports 100/1000/2500BASE-T connections, popularly called a Multigigabit (mGig) port. This module also supports Cisco UPOE+ (802.3bt, up to 90W), which can be used for powering a cellular gateway directly from the host router. The C-NIM-1M is supported on the Catalyst 8200 Series, 8200L, and all 8300 Series platforms.

Cisco single-wide service module carrier card for 2x NIMs (C-SM-NIM-ADPT)

Figure 4.            

Cisco single-wide service module carrier card for 2x NIMs (C-SM-NIM-ADPT)

The C-SM-NIM-ADPT is a dual-NIM carrier card in an SM-X form factor for Catalyst 8300 Series platforms. This module supports a wide variety of NIMs, including the C-NIM Layer 3 WAN modules for the Catalyst 8000 platforms. See Table 6 for a list of supported modules. Since it connects to the backplane with two 10-Gbps links, this carrier card will not impose any bottleneck on traffic, even if two 10-Gbps C-NIM-1X modules are installed. It supports full online insertion and removal. There is no upper limit on the number of C-SM-NIM-ADPT cards that can be installed in a Catalyst 8300 Series platform, other than available SM-X slots.

Features

The Cisco Catalyst 8000 Gigabit Ethernet WAN Modules are based on the technology of the onboard Gigabit Ethernet and SFP/SFP+ ports of the Cisco Catalyst 8000 Edge Platforms. Feature support will therefore be identical to that of the onboard ports on the Catalyst 8300 and 8200 Series and the 8200L.

Module feature comparison

Table 1 compares the software and hardware features at a high level.

Table 1.        Feature comparison

Variable

Cisco 1-port 10-Gbps/1-Gbps WAN

C-NIM-1X

Cisco 2-port 100-Mbps/1-Gbps WAN NIM

C-NIM-2T

Cisco 1-port 2.5-Gbps/1-Gbps WAN

C-NIM-1M

Cisco single-wide service module carrier card for 2x NIMs

C-SM-NIM-ADPT

Form factor

NIM

NIM

NIM

SM-X

Catalyst 8000 Edge Platforms supported

8300 Series

8300 and 8200 Series, 8200L

8300 and 8200 Series, 8200L

8300 Series

Required Cisco IOS® version

17.3.2

17.6.1

17.6.1

17.3.2

WAN connection

1000BASE-X SFP
10-Gbps SFP+

100/1000 BASE-T 1000BASE-X SFP

100/1000/2500M BASE-T

Connection media

1x SFP/SFP+

2x RJ-45/SFP groups

One port from each group can be used simultaneously

1x RJ-45

Power over Ethernet

No

No

90W

IEEE 802.3

af/at/bt

MACsec support
(IEEE 802.1AE)

256-bit

256-bit

No

Online insertion and removal

Online insertion only

Online insertion only

Online insertion only

Yes

10G backplane connection to forwarding engine

Yes

No

No

Yes

Catalyst 8300 Series NIM density with C-SM-NIM-ADPT

The Gigabit Ethernet WAN modules are generally supported on all Cisco Catalyst 8000 Edge Platforms subject to the availability of an appropriate slot. You may deploy as many modules as the platform slot density allows.

Table 2 shows the maximum NIM density possible per Catalyst 8300 Series platform by using the C-SM-NIM-ADPT adapter.

Table 2.        NIM density

Platform

NIM and SM slots

Maximum supported NIMs with C-SM-NIM-ADPT

C8300-2N2S-4T2X

2 NIM, 2 SM

6x NIMs

C8300-2N2S-6T

2 NIM, 2 SM

6x NIMs

C8300-1N1S-4T2X

1 NIM, 1 SM

3x NIMs

C8300-1N1S-6T

1 NIM, 1 SM

3x NIMs

C-NIM-1M PoE

The C-NIM-1M supports one Cisco UPOE+ port (802.3bt, 90W port). The support, enablement, and exact current draw of the PoE is provided with a software API that allows the host to manage the total system draw on its PoE power supply.

Table 3.        PoE power supply specifications

 

C-NIM-1M

PoE

90W x 1

PoE voltages

Nominal: -54V

Range: -53V to -55.8V

Physical specifications

Tables 7 and 8 list the physical and environmental specifications, respectively, of the Gigabit Ethernet WAN service modules.

Table 7.        Physical specifications

C-NIM-1X

C-NIM-2T

C-NIM-1M

C-SM-NIM-ADPT

Form factor

NIM

NIM

NIM

SM-X

Dimensions
(H x W x D)

1.25 x 3.50 x 7.24 in. (32 x 89 x 184 mm)

1.25 x 3.50 x 7.24 in. (32 x 89 x 184 mm)

1.25 x 3.50 x 7.24 in. (32 x 89 x 184 mm)

1.57 x 8.11 x 8.15 in (40 x 206 x 207 mm)

Weight

240 grams

360 grams

350 grams

500 grams

Table 8.        Environmental specifications

C-NIM-1X

C-NIM-2T

C-NIM-1M

C-SM-NIM-ADPT

Operating temperature

32° to 104°F

(0° to 40°C)

32° to 104°F

(0° to 40°C)

32° to 104°F

(0° to 40°C)

32° to 104°F

(0° to 40°C)

Storage temperature

-38° to 150°F

(-40° to 70°C)

-38° to 150°F

(-40° to 70°C)

-38° to 150°F

(-40° to 70°C)

-38° to 150°F

(-40° to 70°C)

Relative humidity

5% to 95%

5% to 95%

5% to 95%

5% to 95%

Operating humidity

5% to 85%

5% to 85%

5% to 85%

5% to 85%

Table 9.        Product sustainability

Sustainability Topic

Reference

General

Information on product-material-content laws and regulations

Materials

Information on electronic waste laws and regulations, including our products, batteries and packaging

WEEE Compliance

Information on product takeback and resuse program

Cisco Takeback and Reuse Program

Sustainability Inquiries

Contact: [email protected]

Environmental specifications

Table 8. Environmental specifications

Material

Product packaging weight and materials

Contact: [email protected]

Size and Weights

Table 7. Physical specifications

Ordering information

Table 10 gives ordering information for the Catalyst 8000 Gigabit Ethernet WAN Modules.

Table 10.     Ordering information

Part number

Description

C-NIM-1X (=)

Cisco 1-port 10-Gbps/1-Gbps SFP+ WAN, Network Interface Module

C-NIM-2T (=)

Cisco 2-port 100-Mbps/1-Gbps dual-mode GE/SFP, Network Interface Module

C-NIM-1M (=)

Cisco 1--ort 2.5-Gbps/1-Gbps RJ-45 WAN, Network Interface Module

C-SM-NIM-ADPT (=)

Cisco single-wide 2x NIM carrier module in SM-X form factor


微信扫一扫,下次方便不用找!
公司总机:
企业邮箱:
交换机商城在线客服微信<br/>
用微信扫描,保存名片
负责业务:
负责企业级网络产品交换机,路由器,防火墙, 无线Wlan,视频会议,数据中心,eSight,Aglie Controoler网管软件等全线产品在线销售支持。
为提高您的询价效率,节省供货时间,请用微信扫描下方经理名片二维码,加好友备注保存
买交换机,就在交换机商城!(https://www.jhj.cn)
北京市海淀区上地三街中黎科技园3号楼4F
联系我们
地址:
电话:
邮箱:
2013-2023 神州网维科技(北京)有限公司 技术支持:佳择企服
企业微信
产品支持
回到顶部